 |
Drinking water testing for turbidity
Number：NS-ZS601
Price：0.00
Hits：395
Time：2023-04-07 10:39:21
|
Description
NS-ZS601 range of turbidity for drinking water
Drinking water testing for turbidity NS-ZS601 range of turbidity for drinking water
Product introduction：
The soil contains mud, silt, fine organic matter and other microorganisms and colloids to give turbidity in the water.The turbidity sensor is a sensor that detects the turbidity value of a water by using the degree of hindrance that occurs when suspended matter in the water passes through the light.After the infrared light wave transmitted by the transmitter on the sensor is absorbed, reflected and scattered by the measured object during transmission, a part of the transmitted light can be irradiated to the detector in the 180° direction, and the intensity of the light received on the detector is measured and measured. The turbidity of sewage has a certain relationship, so the turbidity of sewage can be calculated by measuring the intensity of transmitted light. It is widely used in the monitoring of turbidity values in chemical, electroplating, paper making, environmental water treatment engineering, pharmaceutical, food, tap water and other solutions. Especially suitable for use in the field and on the spot.
Drinking water testing for turbidity NS-ZS601 range of turbidity for drinking water
Technical indicators：
Measuring Range: 0-10000NTU, measurement range can be customizable.
Accuracy: ±1.0%FS
Repeatability : ±1.0%
Signal output: equipped with RS485 communication (partially compatible with MODBUS-RTU protocol) and 4~20mA signal output, all of which are optocoupler isolation protection
Working conditions: Ambient temperature is 0~60°C, Withstand voltage is ≤0.6MP
Output load: <300Ω（4-20mA）
Working voltage: DC 12V±10%
Size: Length 237mm, maximum outer diameter 64mm
Installation method: submerged
Mounting thread: G1 inch pipe thread
Weight: 0.2kg
Protection level: IP68
